Philips AC0850/11 - Replacing the filter; Understanding the healthy air protect lock

8 EN

Wipe the surface of the lter with soft wet cloth or clean the surface of the lter
with a vacuum cleaner�
Note:
•
if you use a high power/ industrial vacuum cleaner, it may damage the lter.
5 Replacing the filter
Understanding the healthy air protect lock
This appliance is equipped with the healthy air protect lock to make sure that the NanoProtect lter
is in optimal condition when the appliance is operating. When the lter is almost expired, the lter
replacement alert ( ) lights up red, which indicates that it needs to be replaced. If you do not replace
the lter in time, the lter replacement alert ( ) will ash. The appliance will stop operating and get
locked�

Note:
•
The lter is not washable or reusable.
•
Always turn o the air purier and unplug from the electrical outlet before replacing the lter.
CLOSEOPEN
CLOSEOPEN
1
2
3
4
5
1 Rotate the base anti-clockwise to remove it from the appliance�
2 Pull the lter out from the appliance. Discard the used lter.
3 Remove all packaging materials of the new lter.
4 Put the lter into the appliance.
5 Reattach the base and rotate it clockwise to fasten the base�
6 Put the plug of the air purier in the power socket.
7 Press the power button to switch on the appliance�
8 Press and hold for 3 seconds to reset the lter lifetime counter.
9 Wash your hands thoroughly after replacing the lter.