Philips AC3055 - Changing the Mode Setting; Turning on and off

27EN
Turning on and o
Note:
• For optimum purication performance, close doors and windows.
• Keep curtains away from the air inlet or air outlet.
1 Put the plug of the air purier in the power socket.
2 Touch to switch on the air purier.
» The air purier beeps.
» The “ ” displays on the screen during warming
up. Then the air purier shows the PM2.5/IAI/
Gas level after measuring the air quality.
» The air purier operates in the auto mode with
PM2.5 displayed on the screen.
3 Touch and hold the button for 3 seconds to
switch o the air purier.
Note: If the air purier stays connected to the electrical outlet after turning
OFF, the air purier will operate under the previous settings when turned ON
again.
Changing the mode setting
You can choose Auto mode, Turbo mode or the Sleep mode by touching the
button.
过敏原 气态污染物 过敏原 气态污染物
Auto mode ( ): In Auto mode, the dual-sensor senses the air quality in real-
time and the appliance automatically adjusts the fan speed in accordance
with the ambient air quality.
Turbo mode ( ): In Turbo mode, the air purier operates on the highest
speed.
Sleep mode ( ): In Sleep mode, the air purier operates quietly at a low
speed. After 3 seconds, the screen lights o.
过敏原 气态污染物