What to do if Philips AC3829/10 Air Cleaner still indicates filter replacement?
If your Philips Air Cleaner still indicates that you need to replace a filter after you already did, plug in the appliance, switch it on, and then touch and hold the Timer/Reset button for 3 seconds.
What to do if my Philips AC3829/10 Air Cleaner doesn't work even though it is plugged in?
The Philips Air Cleaner may not work because the filter replacement light has been flashing, and you have not replaced the NanoProtect filter, and the appliance is now locked. In this case, replace the filter and reset the filter lifetime counter. Alternatively, the water refill light may be flashing. Make sure the water tank is properly installed and there is enough water in the water tank.
Read this user manual carefully before you use the appliance, and save it for future reference.
Steps for installing the NanoProtect filter and preparing for humidification.
Instructions on setting up and resetting the Wi-Fi connection for the appliance.
Detailed steps for hygienically cleaning water tank, tray, and wick.
Understanding the lock and replacing the NanoProtect filter.
Detailed instructions for replacing the NanoCloud rotary humidification wick.
General| Model | AC3829/10 |
|---|---|
| Gas filtration | Yes |
| Color | White |
| Filtration Technology | VitaShield IPS |
| Product Type | Air Purifier |
| Filtration System | HEPA and Active Carbon |
| CADR (Clean Air Delivery Rate) | 333 m³/h |
| Filter lifetime | 12 months |
To Next Page
