Philips AC4014 - Page 15

15
English
7 To reattach the front panel, insert the top
hooks into the top of the purier rst (1).
Then, push the panel against the body of
the purier (2).
1
2
Note
•
Alternatively, you can clean the pre-lter by
removing the dust with a vacuum cleaner.
• Make sure that the pre-lter is completely dry.
If it is still wet, bacteria may multiply in it and
shorten the lifetime of the pre-lter.
• Make sure that the side with the two projections
is pointing towards you, and that all hooks of the
pre-lter are properly attached to the purier.
EN
English