Philips AC4014 - Cleaning the Pre-Filter

14
3 To remove the pre-lter, grab the two
projections and pull the lter towards
you.
4 Use a vacuum cleaner to clean the pre-
lter or wash it under a running tap. If the
pre-lter is very dirty, use a soft brush to
brush away the dust.
5 Air dry the pre-lter.
6 Put the pre-lter back into the purier.
Attach all hooks properly to the purier.
6 Cleaning the
pre-filter
Note
•
The pre-lter is washable and vacuum cleanable.
• Clean the pre-lter for every two weeks to
ensure optimal functioning of the purier.
1 Switch off the purier and unplug it.
2 Place your ngers in the recess of the side
panels and gently pull the bottom part of
the front panel towards you (1). Then lift
the hooks at the top of the panel out of
the top of the purier (2).
1
2
EN