Philips AC4014 - Using the Air Purifier; Understand the Air Quality Light; Understand the Healthy Air Protect Alert; Switch on

9
English
4 Using the air
purifier
Understand the air quality
light
Coloroftheairquality
light ring
Air quality level
Blue Good
Purple Fair
Red Bad
The air quality light automatically goes on when
the purier is switched on.
Note
•
The built-in air quality sensor measures
the air quality and automatically selects the
appropriate color of the air quality light. When
the air is clean, the color of the air quality light
is in blue. When the air quality deteriorates,
the color of the air quality light changes to
purple or red.
Understand the healthy air
protect alert
The lter replacement light ( ) indicates the
lters have to be replaced.
Healthy air protect alert Follow this
Filter replacement light
is
on continuously. This lasts
approximately for 2 weeks.
On the last day of 2 weeks,
the purier beeps every 30
minutes to inform you that the
lters need to be replaced.
Replace the
activated
carbon lter
and the
HEPA lter.
Switch on
1
Plug the air purier into the power supply.
» All lights go on twice and you hear a
beep. Then, the lights go out again.
AC4012 Control
Panel
AC4014 Control
Panel
2 Press the

button to switch on the
purier.
» The air quality light shows the current
air quality.
» The fan speed
light goes on.
3 Press the

button to switch off the
purier.
EN
English