Philips ADD4969 - Indicator Panel and Controls; Indicator Lights; Power Switch Operation

3 Indicator panel and switch
When the dispenser is heating up the water in the hot water tank, the heating indicator light
will be on.
When the dispenser is cooling the water in the cold water tank, the cooling indicator light will
be on.
When there's no water left in the bottle, the water shortage indicator will be on. Replace with
a new bottled water and the indicator will switch o automatically.
The lter lifetime indicator red light will start to ash when there are 15 days lter lifetime left,
it will stay on until the lter reaches the end of life. Replace the lter and reset the lifetime
indicator as instructed, the indicator will switch o automatically afterwards.
At the back of the dispenser there is a black switch which controls the heating power. You
may press it to switch between high power, low power and OFF.
Water shortage indicator
Cooling indicatorHeating indicator
Filter lifetime indicator
Indicator panel
Low power heating
O
High power heating
Cooling switch
Power Switch
3