8 Troubleshooting
and reconnect with power.
cold water
Cooling tank temperature sensor
abnormal alarm
and reconnect with power.
E0b: Unable to cool the
water
If the machine is not dispensing
ice water, or the cooling time
exceeds 1 hour in a single cycle,
the machine will activate its cooling
protection and stop cooling.
E06: The product is
dispense water normally.
Filter not installed properly or clogged."
please replace it.
E04: Unable to dispense
hot water.
Abnormal heating alarm.
water.
Abnormal alarm from the water
outlet temperature probe.
try again to dispense hot water.
extract 300ml of ambient water,
and try extracting the hot water
again. Please contact customer services
if the problem cannot be solved.
E01: Cannot extract hot
water.
Tap water temperature
exceeds 38℃.
Make sure the tap water temperature
does not exceed 38℃.
3s 3s
The" " changes to white again, which means
you have reset the lifetime sucessfully.
If you want to cancel the reset, long press
(If you need to cancel the reset, press and hold
Error
Causes
To Next Page
Loading...
