Philips AE 3905 - Time, Date, and Alarm Management; Setting Device Time and Timezone; Setting the Date Correctly; Configuring Alarm Times

Adjusting time, date and alarmtime
Adjusting the time
Adjust successively the timezone, hours and
minutes:
• Keep TIME button pressed.
-One or more place-names start blinking in the
display.
• Adjust the timezone using the DISPLAY SET +
or - buttons and then release the TIME button.
• Repeat this procedure for adjusting the hours and the minutes.
Note: When you press any other function button during this procedure,
time setting starts all from the beginning.
Adjusting the date
Adjust successively the years, months and days:
• Keep the DATE button pressed.
-The 'years* indication starts blinking in the
display.
• Adjust the years using the DISPLAY + or -
buttons and then release the DATE button.
• Repeat this procedure for adjusting the months and the days.
Adjusting the alarmtime
Adjust successively the hours and the minutes:
• Keep the ALARM button pressed.
-The 'hours' indication starts blinking in the
display.
• Adjust the hours using the DISPLAY + or -
buttons and then release the ALARM button.
• Repeat this procedure for adjusting the minutes.
World time
In the display at the right side you can read the
time in another city or part of the world.
• Press CITY SCAN EAST or WEST briefly each
time until you reach the desired city- or
timezone. The ‘city-time’ appears in the display.
Note: The set does not take summertime in
account.
*3 / EBB
_0'0Ddd
6