Philips AE2012 - Tune to Dab Radio

2 Press TUNING +/- to scroll the menu options:
 [Audio setting]
 [System]
3 To select an option, press SELECT.
4 Repeat step 2-3 if sub-option is available under one option.
[Audio setting]
This function enables you to select mono or stereo
 [Forced mono] Select mono broadcast.
 [Stereo allowed] Select stereo broadcast.
[System]
 [Factory reset] Resets all the settings of this radio player to factory
default.
 [SW version] Software version of the radio player is shown.
Note

If no button is pressed within 15 seconds, the menu exits.
5 Listen to DAB radio
Tune to DAB radio

automatically scans DAB radio stations. Then station list is retained in
memory so the next time the radio player is switched on, the station
scan does not take place.
1 Press DAB/FMrepeatedly to select DAB radio.
» A bar graph indicates the progress of the search and the number
of stations found increase as the scan progresses.