Philips AE2430 - Select a Preset Radio Station

12
EN
2 Tune to a radio station.
3 Press PROG/AUTO SCAN.
» The radio frequency begins to blink.
4 Press 1 - 10 to select a number.
» The selected number begins to blink.
5 Press PROG/AUTO SCAN to conrm.
6 Repeat steps 2 - 5 to program more stations.
To store the previous/next radio station with strongest signal
1 Press to turn on the radio.
2 Press PROG/AUTO SCAN.
» The radio frequency begins to blink.
3 Rotate TUNING clockwise/counterclockwise to skip to the
next/previous radio station with strongest signal.
4 Press 1 - 10 to select a number.
» The selected number begins to blink.
5 Press PROG/AUTO SCAN to conrm.
Tip
• To overwrite a programmed station, program another station in its
place.
Select a preset radio station
1 Press to turn on the radio.
2 Press 1 - 10 to select a preset radio station.