EasyManua.ls Logo

Philips AJ4800 - Setting the Alarm Timer; Configuring Alarms; Activating and Deactivating Alarms

Philips AJ4800
17 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
9EN
5 Set alarm timer
Set alarm
You can set two alarms to ring at different time.
Note
Make sure that you have set the clock correctly.
1 Press and hold or for two seconds to
activate alarm setting mode.
» The hour and minute digits and the
alarm icon ( or ) begin to blink.
2 Press + PRESET/ HR - to set hour.
3 Press + TUNING/ MIN - to set minute.
4 Press or toconrm.
5 Press + PRESET/ HR - or + TUNING/
MIN - to select the alarm source: your last
listened FM station or buzzer.
6 Press or toconrm.
Tip
The alarm volume increases gradually to gently wake
you up.
The maximum radio alarm volume depends on the
volume set on your last listened station, and you can
press + VOLUME - to adjust it, but the buzzer alarm
volume is not adjustable.
If FM tuner is selected as alarm source, yet you are
listening to FM radio at the alarm time, buzzer alarm
will be activated instead.
Activate/deactivate alarm
timer
Press or repeatedly to activate or
deactivate the alarm timer.
» or appears if the alarm timer is on
and disappears if it is off.
To stop the alarm, press the
corresponding or .
» The alarm repeats itself in subsequent
days.
Snooze the alarm
When the alarm sounds, press SNOOZE.
» The alarm snoozes and repeats ringing
nine minutes later.

Related product manuals