Philips AJT3300 - Play Audio from Bluetooth-Enabled Device; Clear the Pairing Information; Control Your Phone Call

8 EN
Note
• If your Bluetooth device has been paired with AJT3300
before,youjustneedtondout[AJT3300] on your
Bluetooth menu, then start the connection.
To disconnect the Bluetooth-enabled device:
• Press and hold for 3 seconds;
• Disable Bluetooth on your device; or
• Move the device beyond the
communication range.
To connect another Bluetooth-enabled device:
• Disable Bluetooth on the current device,
and then connect another device.
Play audio from Bluetooth-
enabled device
Note
• If there is an incoming call on the connected mobile
phone, music play pauses.
After successful Bluetooth connection, play
audio on the Bluetooth device.
» Audio comes out from the clock radio.
• You can press PLAY/PAUSE to start,
pause or resume play.
Clear the pairing information
In Bluetooth mode, press and hold for 8
seconds.
» [BT RESET] scrolls on the display
panel, then all the Bluetooth pairing
information is erased.
» The clock radio returns to Bluetooth
mode automatically after erasion is
completed.
Control your phone call
After Bluetooth connection, you can control
your incoming phone call with this product.
Button Function
Press to answer an incoming call.
During a call, press to end the
current call.
Press and hold to reject an incoming
call.
Note
• Music play pauses when there is an incoming call.