10 Repair and Disassembly
141
Serial Numbers
The serial number of the monitor appears on the device nameplate at the rear of the bottom housing.
It is also stored electronically in the power supply.
• If you change the bottom housing, remove the nameplate from the old housing and fit it to the
new housing.
• If you exchange the power supply of the monitor, you may have to re-enter the monitor serial
number afterwards. Check the serial number of the monitor in the Support Tool device view to see
whether this is necessary: if the sixth digit of a monitor serial number is an "X", you must re-enter
the serial number, which you will find on the nameplate. Refer to the Support Tool Instructions
for Use for details of how to change or re-enter a serial number.
Top Cover Disassembly/Reassembly
This section describes disassembly and reassembly operations for the top cover and its assemblies.
Removing the Top Cover Assembly
1 First fold the display completely flat.
Screw M3x6 with washer, T-10
Screw M3x4, T-10
To Next Page
Loading...
