Philips Avalon FM30 - Page 225

12 Specifications
225
Wired Transducers
Interface Cable Avalon CTS
External Power Supply Option E25
SpO
2
Optional modulation of the QRS tone for changes in the SpO
2
level.
NST Timer Tone for Timer expired.
Status/Prompt tone Configurable volume tone sounded when status or prompt messages are
issued by the fetal monitor.
Touch feed back tone Anytime the user touches the display a low beep is issued in response.
Source Description
Transducers (M2734A/M2734B/M2735A/M2736A/M2738A)
Shock Resistance Withstands a 1 m drop to concrete surface with possible cosmetic
damage only
Water Ingress
Protection Code
M2734A&B/35/36A IP 68 (immersion up to 1 m water depth for 5 hours)
M2738A IP 67 (immersion up to 0.5 m water depth for 30 minutes)
Dimensions and
Weight
M2734A&B/35/36A Size (diameter) 83 mm (3.27 in)
Weight (without cable) <220 g (7.8 oz)
M2738A Maximum size mm/(in):
width x height x depth
50 x 28 x 135 mm
(2.0 x 1.1 x 5.3 in)
Cable length 2.5 m
Weight <150 g (5.3 oz)
Degree of Protection Against Electrical Shock Type CF
Transducer Identification Optical Signal Element (Finder LED), not M2738A
Interface Cable for Avalon CTS (M2731-60001 and M2732-60001)
Shock Resistance Withstands a 1 m drop to concrete surface with possible cosmetic damage only
Water Ingress Protection Code IP X1
Dimensions and Weight Maximum size mm/(in):
width x height x depth
55 x 28 x 50 mm (2.2 x 1.1 x 2.0 in)
Cable length 2.5 m
Weight <200 g (7.0 oz)
M8023A (Option #E25) External Power Supply Weight and Dimensions
Maximum Weight 700 g ±10% (1.5 lb ±10%)
Size (W x H x D) 207 x 70 x 113 mm (8.1 x 2.8 x 4.4 in)