3 Basic Operation
28
4
Date and time
5 Bed label (when connected to a Philips OB TraceVue system)
6 Fetal heart sound volume adjust/indicator
7 Alarm volume adjust/indicator
8 Numeric/measurement values
9 Fetal Trace Recorder - status indicator
Fetal recorder is On
Fetal recorder is Off (when Paper Save Mode is off )
Fetal recorder is Off (when Paper Save Mode is on)
There is a Recorder problem that can be solved by the user (for example, paper out, paper jam,
wrong paper scale set)
Fetal recorder is defective: call service.
10 Avalon CTS System - status indicator:
Avalon CTS interface cable is connected to the monitor, but Avalon CTS base station is not
connected to the interface cable, disconnected from AC mains, or is in Standby.
Avalon CTS interface cable is connected to the monitor, Avalon CTS base station is connected,
powered on, and cordless transducers are ready to use, but no cordless transducers are currently
active (all are still docked in the base station).
Avalon CTS interface cable is connected to the monitor, Avalon CTS base station is connected,
powered on, and at least one cordless transducer has been taken out of the base station and is
active. Any connected wired transducers are disabled.
11 Close all open menus and windows and return to main screen
12 Battery Status Indicator
13 Scroll to display more SmartKeys
14 SmartKeys - these can vary according to your monitor's configuration
15 Silence - key which acknowledges all active alarms by switching off audible alarm indicators
To Next Page
Loading...
