3 Basic Operation
30
SmartKeys
SmartKeys are configurable graphical keys, located at the bottom of the main screen. They give you
fast access to functions. The selection of SmartKeys available on your monitor depends on your
monitor configuration and on the options purchased.
Main Setup - enter main setup
menu.
Recorder Start/ Stop - turn the trace
recorder on or off.
Pause Alarms - pauses alarm
indicators. Pause duration depends
on monitor configuration. If pause
duration is infinite, this key is
labeled
Alarms Off.
Select again to immediately re-
enable alarm indicators.
Paper Advance - advance the paper
automatically to the next fold.
Start Recordng - turn the trace
recorder on.
Stop Recordng - turn the trace
recorder off.
Start ECG- start printing the
MECG, DECG or both waves,
when both are available.
Stored Data Rec - print trace data
from the monitor's memory.
Admit/ Dischrge - enter patient
identification menu to admit/
discharge
Enter Notes - enter notes
Toco Baseline - reset Toco
baseline/whichever is available
(see below)
Timer - enters NST timer window
Zero IUP - zero IUP
measurement/whichever is
available (see above)
Set Marker - mark an event
To Next Page
Loading...
