- 10 -
Positioning the baby camera
Warning: Long cable. Strangulation hazard!
>1-1.5m/3.5-5ft
1 For optimal sound detection, make sure that the baby camera is no
further than 1�5 meters/ 5 feet away from the baby� Make sure that
the baby camera is at least 1 meter / 3�5 feet away from the baby
because of potential strangulation hazard�
>2.5m/8.2ft
2 To avoid acoustic feedback, make sure that the smart device is at least
2.5meters / 8.2feet away from the baby camera.
Note: If you use a cordless phone, wireless video, Wi-Fi network,
microwave oven or bluetooth device on 2.4GHz and you experience
interference on the baby camera, move the smart device until there is
no more interference�
3 There are 2 ways to position the baby camera:
a Place the baby camera on a stable, level and horizontal surface.
b Mount the baby camera to the wall with screws (not included).
Tip: The wall mount template (see the 'Wall mount' chapter) to mount
the baby camera to the wall can be found at the end of this user
manual�
Tip: Position the baby camera at a higher level to get a good overview
of the baby's bed or playpen�
4 The baby camera can be rotated to ensure the best visibility of your
baby�
To Next Page
Loading...
