- 12 -
Note
•
If you regularly express more than
125 ml per session on each breast, you
can use a 260 ml/9 oz Philips Avent
bottle to prevent overlling and spillage.
•
The appliance will pause when there is
no operation for more than 30 minutes.
7 When you have nished expressing,
press the power button ( ) for
2 seconds to switch o the breast
pump and then remove the pump body
from your breast carefully.
Tip
•
After switching o the breast pump,
break the seal between the breast
and the pump funnel with your nger,
and then remove the pump from your
breast.
8 Disconnect the power plug to the
power socket, and then disconnect the
power adapter from the pump motor.
1
2
Tip
•
In order to protect the appliance,
please always shut down the appliance
by pressing the power button instead
of plugging the adapter o.
Note
•
You do not need to use all stimulation/
expression levels, only use the levels
that are comfortable for you.
•
Place the pump motor on a stable and
at surface to avoid any accidental
drops when in use. If not, this may pull
the pump body o from the breast and
cause injury.
6 The twin electric breast pump enables
you to express milk from both breasts
at the same time. However, you can
also use the appliance to express
from one breast. To express from one
breast, you need to disconnect one
silicone tube from the cap, and insert
it into the connecting hole, or you can
take the pump from one breast. Other
operations are just in the same way.
To Next Page
Loading...
