What to do if I experience pain using Philips Toddler feeding breast pump?
If you experience pain when using the breast pump, choose a suction level that is comfortable for you. Also, check if the silicone diaphragm is undamaged (does not have small cracks, holes etc.), and ensure that your nipple is placed in the center of the cushion. If the pain persists, stop using the breast pump and consult your healthcare professional.
Why is the suction level too low on my Philips AVENT SCF395 Breast Pump?
If you're not feeling enough suction with your Philips Breast Pump, try increasing the suction level if possible. Check that the silicone diaphragm is correctly assembled. Also, check that the white valve isn't damaged and is assembled correctly. Ensure all other parts of the breast pump are intact and correctly assembled. Finally, make sure the pump is properly positioned on your breast to create a good seal.
What to do if I do not feel any suction from my Philips AVENT SCF395?
If you're not feeling suction with your Philips Breast Pump, first try a higher suction level. Then, check if the silicone diaphragm and white valve are correctly assembled. Also, make sure all parts are intact and properly assembled. Ensure the pump is positioned correctly on your breast to create a seal.
What to do if my Philips AVENT SCF395 Breast Pump does not switch on?
If the Philips breast pump does not switch on (indicator lights do not go on), check if you are using the adapter that was supplied with the device and that the adapter is connected correctly to the motor unit and wall socket. You can also try connecting the adapter to another wall socket to see if the breast pump can be switched on.
What to do if my Philips Toddler feeding breast pump does not switch on?
If the breast pump does not switch on, check that you are using the adapter that was supplied with the device and that the adapter is connected correctly to the motor unit and wall socket. You can also connect the adapter to another wall socket and check if the breast pump can be switched on.
What to do if all indicator lights are flashing on my Philips Toddler feeding motor unit?
If all indicator lights on the motor unit are flashing and the device shuts off automatically, try to switch on the motor unit again. Also, check if you are using the adapter that was supplied with the device.
What to do if I experience pain when using my Philips AVENT SCF395 Breast Pump?
If you feel pain while using the Philips Breast Pump, first choose a suction level that feels comfortable. Ensure your nipple is centered in the cushion. Check the silicone diaphragm for damage like cracks or holes. If the pain continues, stop using the pump and consult your healthcare provider.
What to do if all indicator lights are flashing on my Philips Breast Pump?
If all the indicator lights are flashing on your Philips Breast Pump and it shuts off, try switching the motor unit on again. Also, verify that you are using the adapter that was supplied with the device.
How to fix a Philips Breast Pump that won't turn on?
If your Philips Breast Pump won't turn on, verify that you're using the adapter that came with the device and that it's correctly connected to both the motor unit and the wall socket. Try plugging the adapter into a different wall socket to see if that resolves the issue.
What to do if Philips AVENT SCF395 Breast Pump has low suction?
If your Philips Breast Pump has low suction, first try increasing the suction level. Check that the silicone diaphragm and white valve are correctly assembled. Also, inspect all parts of the pump for correct assembly and ensure the pump is properly positioned on your breast to create a good seal.
Safety precautions regarding choking, strangulation, and injury risks.
Information on disease transmission risks during breastfeeding.
Precautions against electric shock hazards.
Hygiene guidelines to prevent contamination.
Advice to prevent breast and nipple issues like pain or damage.
Precautions against RF interference causing malfunction.
Instructions for cleaning and disinfecting parts that contact breast milk.
Detailed steps for cleaning the breast pump parts manually.
Detailed steps for cleaning the breast pump parts in a dishwasher.
Solutions for experiencing pain while using the breast pump.
Troubleshooting steps if the breast pump does not switch on.
What to do if all indicator lights flash and the device shuts off.
Solutions for not feeling suction or having very low suction.
Advice for when the breast pump suction is too strong.
Tips for expressing little or no milk.
Addressing issues of the breast pump being cracked or discolored.
General| Type | Electronic |
|---|---|
| Input voltage | 100 - 240 V |
| Product color | Transparent |
| Nipple material | Polypropylene (PP) |
| Stimulation mode | Yes |
| Number of suction levels | 16 |
| Number of stimulation levels | 8 |
Weight and Dimensions| Capacity | 120 ml |
|---|
To Next Page
