Philips AVENT SCF395 - Cleaning and Disinfecting; Parts in Contact with Milk; Step 1: Disassembling

Cleaning and disinfecting
Overview
Clean and disinfect the parts that come into contact with the breast and breast milk as described below:
When How
Clean and disinfect before rst use and after
every use.
Disassemble all parts and then clean them as
described in chapter 'Cleaning' and disinfect
them as described in chapter 'Disinfecting'.
The following parts do not come into contact with the breast and breast milk. Clean them as described below.
These parts do not need disinfection.
When How
Clean when needed.
Wipe with a clean, damp cloth with water and
mild detergent.
Step 1: Disassembling
Disassemble the breast pump, bottle and storage cup completely.
Also remove the white valve from the breast pump.