Why is there low suction on my Philips Avent Plus SCF373/11 Breast Pump?
If you're not feeling enough suction with your Philips Breast Pump, try increasing the suction level if possible. Check that the silicone diaphragm and white valve are correctly assembled. Also, ensure all breast pump parts are intact and correctly assembled. Make sure the pump is correctly positioned on your breast to create a proper seal.
What to do if Philips Avent Plus SCF373/11 Breast Pump does not switch on?
If your Philips Breast Pump isn't turning on, verify you're using the adapter that came with the device and that it's properly connected to both the motor unit and the wall socket. Try plugging the adapter into a different wall socket. Then, press and hold the on/off button to see if the pump starts.
Why Philips Breast Pump does not start immediately after storage?
If your Philips Breast Pump doesn't start immediately after being switched on post-storage, it might be due to storage temperatures outside the recommended range. Allow the pump to sit in a room at 20°C/68°F for 30 minutes to adjust its temperature to the operating range (5°C/41°F to 40°C/104°F).
How to stop pain when using Philips Avent Plus SCF373/11?
If you feel pain when using the Philips Breast Pump, first, select a comfortable suction level. Check the silicone diaphragm for damage such as cracks or holes. Ensure your nipple is centered in the cushion. If pain continues, discontinue use and consult your healthcare provider.
Why is the suction too strong on my Philips Breast Pump?
If the suction of your Philips Breast Pump feels too strong, try lowering the suction level. When you express for the first time, begin with the default suction level (level 5 in stimulation mode, level 11 in expression mode) and adjust as needed. Different levels may feel more comfortable during different sessions. Only use the parts provided with this breast pump. Check the silicone diaphragm for any damage.
Why are all lights flashing on my Philips Avent Plus SCF373/11?
If all the indicator lights on your Philips Breast Pump are flashing and the device shuts off, try switching the motor unit on again. Also, ensure you are using the adapter that was supplied with the device.
General| Type | Electric Breast Pump |
|---|---|
| Adjustable Settings | Yes |
| Comfort | Soft massage cushion |
| Technology | Natural Motion Technology |
| Bottle Capacity | 125 ml |
| Massage Mode | Yes |
| Bottle Compatibility | Philips Avent bottles |
| Pump Mechanism | Electric |
| Material | BPA free |
| Cushion Size | Standard |
| Power Source | Mains & Battery |
| Included Accessories | 125 ml Natural bottle |
To Next Page