- 9 -
3 Insert the Massage Cushion into the
pump funnel and press the rim to
ensure a perfect seal.
4 Put the silicone diaphragm onto the
pump body and press the rim to make
sure a perfect seal.
2
1
Tip
•
You may nd it easier to assemble
while it is wet.
5 Firmly push the cap onto the silicone
diaphragm, so that it sites securely on
top of the silicone diaphragm.
6 Repeat above steps 1-5 for another
pump body.
7 Connect the silicone tube to the cap
and the motor rmly.
8 Connect the power adapter to the
pump motor, and then insert the
power plug to the power socket.
2
1
Note
•
Only use the adapter provided with this
product. Do not use other adapters.
To Next Page
Loading...
