Philips AZ1850 - Program Radio Stations Manually; Select a Preset Radio Station

All available stations are programmed in the order of »
waveband reception strength.
Therstprogrammedradiostationisbroadcast »
automatically.
Program radio stations manually
Note
Youcanprogramamaximumof20FMradiostationsand20MW •
radio stations.
1 Tune to a radio station.
2 PressPROG to activate program mode.
[PROG](program)blinksonthedisplay. »
3 Press toallocateanumber(1to20forFMand1to20for
MW) to this radio station, then press PROGtoconrm.
The preset number and the frequency of the preset station »
are displayed.
4 Repeat the above steps to program other stations.
Note
To overwrite a programmed station, store another station in its •
place.
Select a preset radio station
1 In tuner mode, press to select a preset number.