AVIS
AVI SO
DIGITAL TUNER DIGITAL TUNER
DIGITAL TUNER
Tuning to radio stations
1 Press y to on, then press Source selector
to select TUNER (or press TUNER on the remote
control) .
– is displayed briefly and then the radio
station frequency, waveband and, if programmed,
a preset number are shown. (See 3)
2 Press FM
•MW
once or more to select your
waveband. (or press BAND on the remote control)
3 Press and hold SEARCH ∞ or §
(or TUNING -, + on the remote control) until the
frequency in the display starts running.
™ The radio automatically tunes to a station of suf-
ficient reception. Display shows dur-
ing automatic tuning.
4 Repeat steps 2-3 if necessary until you find the
desired station.
• To tune to a weak station, press ∞ or § briefly
and repeatedly until you have found optimal recep-
tion.
To improve radio reception:
• For FM, extend, incline and turn the telescopic aeri-
al. Reduce its length if the signal is too strong.
• For MW, the set uses a built-in aerial. Direct this
aerial by turning the whole set.
Programming radio stations
You can store up to a total of 30 radio stations in the
memory, manually or automatically (Autostore).
Manual programming
1 Tune to your desired station (see Tuning to radio
stations).
2 Press PROGRAM to activate programming.
™ Display: program flashes.
3 Press PRESET (ALB/ PRE)
-, +
once or more to
allocate a number from 1 to 30 for this station.
4 Press PROGRAM to confirm.
™ Display shows the preset number, waveband
and the frequency of the preset station.
5 Repeat steps 1-4 to store other stations.
Helpful hints: You can erase a preset station by
storing another frequency in its place.
Autostore
Autostore automatically starts programming radio sta-
tions from preset 1. Any previous presets e.g. manual-
ly programmed will be erased.
• Press and hold PROGRAM until
appears.
™ Available stations are programmed.
™After all stations are stored, the first autostore
preset station will then automatically play.
To listen to a preset or autostore station
Press the PRESET (ALB/ PRE) -, + buttons once or
more until the desired preset station is displayed.
To Next Page
Loading...
