Philips AZ330T - Audio Playback Operations; Playing Audio CDs; Playing from USB Devices

9EN
4 Play
Play a CD
Note
•
You cannot play CDs encoded with copyright
protection technologies.
• When an audio-in cable is plugged, CD/USB playback
stops, and the unit switches to audio in mode
automatically.
You can play commercially available audio CDs:
• CD-Recordables(CD-R)
• CD-Rewritables(CD-RW)
• MP3-CDs
1 Switch the source selector to CD/USB .
2 Press the CD/USB button on the top
of the CD sound machine repeatedly to
select USB source.
» [ CD] displays on the LCD screen.
3 Open the CD compartment.
4 Insert a CD with the printed side facing up
and close the CD lid gently.
» Your CD sound machine starts to play
automatically.
• To select a track,press
/ .
• To pause CD play, press
.
» [
]andtracknumberash.
• To resume CD play, press
again.
• To stop CD play, press
.
Play from USB devices
Note
•
Make sure that the USB device contains playable audio
content.
1 Switch the source selector to CD/USB .
2 Press the CD/USB button on the top
of the CD sound machine repeatedly to
select USB source.
» [USB] displays on the LCD screen.
3 Insert the USB device into the socket.
» Play starts automatically. If not, press
.
BT
FM OFF
CD/USB
USBCD
USBCD
BT FM OFFCD/USB