Philips BDL4645E/00 User Manual (English)

Other manuals for Philips BDL4645E/00

Questions and Answers:

J
jonesalexisJul 29, 2025
What to do if I can see picture but no sound is heard on my Philips BDL4645E/00 Monitor?
- J
  Jerome RobinsonJul 29, 2025
  The issue might be due to several reasons: 1. The source signal cable might be improperly connected. Ensure that both video and sound inputs are correctly connected. 2. The volume might be turned all the way down. Press the [VOL UP] or [VOL DOWN] button to increase the sound. 3. [MUTE] might be turned on. Switch MUTE off by using the [MUTE] button. 4. No external speakers are connected. Connect external speakers and adjust the volume to a suitable level.
K
Kendra BlackAug 3, 2025
Why is there no picture on my Philips BDL4645E/00 Monitor?
- N
  nbrownAug 3, 2025
  There are several possible reasons: * The power cord might be disconnected, so plug it in. * The main power switch on the back of the display might not be switched on, so ensure it is. * The selected input might not have a connection, so connect a signal to the display. * The display could be in standby mode.
K
Kristina RiveraAug 7, 2025
What to do if the picture is distorted with abnormal patterns on my Philips BDL4645E/00?
- K
  keithfieldsAug 7, 2025
  This could be happening because: 1. The signal cable is not connected properly. Make sure that the signal cable is firmly attached. 2. The input signal is beyond the capabilities of the display. Check the video signal source to see if it exceeds the display's range. Verify its specifications in the display’s specification section.
E
Elizabeth HayesAug 11, 2025
What to do if display image doesn’t fill up the full size of the screen on Philips BDL4645E/00 Monitor?
- T
  tammy63Aug 11, 2025
  The zoom mode might not be set correctly. Use the Zoom mode or Custom zoom function in the Screen menu to fine-tune display geometry and time frequency parameter.
C
Cassandra ClarkAug 15, 2025
Why is there interference displayed on the Philips Monitor or audible noise?
- O
  owiseAug 16, 2025
  This interference might be caused by surrounding electrical appliances or fluorescent lights. Try moving the display to another location to see if the interference is reduced.
B
Brian WilliamsAug 19, 2025
Why can after-images still be seen on the Philips Monitor after the display is powered off?
- T
  Tyler MortonAug 19, 2025
  A still picture might have been displayed for an extended period. To prevent this, avoid displaying a still image for an extended period, as it can cause a permanent after-image to remain on the display.
Z
Zachary RuizAug 25, 2025
What to do if some picture elements do not light up on my Philips BDL4645E/00 Monitor?
- N
  nwrightAug 25, 2025
  This display is manufactured using an extremely high level of precision technology; however, sometimes some pixels of the display may not display. This is not a malfunction.

Philips BDL4645E/00 Specifications

Display

diagonal screen size	46 inch / 117 cm
panel resolution	1920 x 1080p
optimum resolution	1920 x 1080 @ 60 Hz
brightness	400 cd/m²
contrast ratio (typical)	4000:1
response time (typical)	6.5 ms
aspect ratio	16:9
viewing angle (H / V)	178 / 178 degree
pixel pitch	0.53 x 0.53
display colours	16.7 million colours

Operating Conditions

temperature range (operation)	0 - 40 °C
relative humidity	5 - 90 %
MTBF	50, 000 hour(s)

Power

mains power	90-264 VAC, 50/60 Hz
consumption (On mode)	Typ. 112 W
standby power consumption	<0.5 W

Sound

built-in speakers	2 x 10 W

Weight and Dimensions

bezel thickness	35.3 mm
product weight	26 kg
product weight (lb)	57.3
set dimensions (W x H x D)	1091 x 646 x 120 mm
set dimensions in inch (W x H x D)	43.0 x 25.4 x 4.7 inch

View in Manual