Why is there no picture on my Philips BDL5520QL?
The Philips Monitor might not be displaying a picture because the power cord is disconnected, the main power switch on the back is off, the selected input has no connection, or the display is in standby mode. To resolve this: * Plug in the power cord. * Ensure the power switch is on. * Connect a signal to the display.
What to do if there is no sound on my Philips Monitor?
If you see a picture but hear no sound on your Philips Monitor, the issue could be due to several reasons: 1. The source signal cable might not be properly connected. Ensure both video and sound inputs are correctly connected. 2. The volume might be turned down. Press the volume up button to increase the sound. 3. The mute function might be enabled. Disable mute by using the designated button. 4. External speakers might not be connected. Connect external speakers and adjust the volume to a suitable level.
How to fix a distorted picture with abnormal patterns on Philips BDL5520QL?
A distorted picture with abnormal patterns on your Philips Monitor can be caused by: 1. An improperly connected signal cable. Ensure the signal cable is firmly attached. 2. An input signal beyond the display's capabilities. Check the video signal source to ensure it is within the supported range. Verify its specifications in the display’s specification section.
How to fix abnormal color on Philips Monitor?
If the color on your Philips Monitor appears abnormal, it might be due to a poorly connected signal cable. Ensure that the signal cable is firmly attached to the back of the display.
What to do if I can hear sound, but there is no picture on my Philips Monitor?
If you can hear sound but see no picture on your Philips Monitor, the source signal cable may be improperly connected. Make sure that both video inputs and sound inputs are correctly connected.
Why doesn’t the display image fill up the full size of the screen on my Philips Monitor?
If the display image doesn’t fill the full screen size on your Philips Monitor, the zoom mode might not be set correctly. Use the Zoom mode or Custom zoom function in the Screen menu to fine-tune display geometry and time frequency parameter.
What causes interference on my Philips BDL5520QL Monitor?
Interference or audible noise on your Philips Monitor is often caused by surrounding electrical appliances or fluorescent lights. Try moving the display to another location to see if the interference is reduced.
Why are after-images still seen on the Philips Monitor after it's powered off?
After-images on your Philips Monitor after it's powered off are caused by displaying a still picture for an extended period. Avoid displaying a still image for a long time, as this can cause a permanent after-image to remain on the display.
Why some picture elements do not light up on Philips BDL5520QL?
This Philips Monitor is manufactured using an extremely high level of precision technology: however, sometimes some pixels of the display may not display. This is not a malfunction.
General| Panel Technology | LCD |
|---|---|
| Contrast Ratio | 1200:1 |
| Response Time | 8 ms |
| Aspect Ratio | 16:9 |
| Viewing Angle | 178° (H) / 178° (V) |
| Display Colors | 16.7 million |
| USB Ports | 2 |
| VESA Mount | 400 x 400 mm |
| Screen Size | 55 inches |
| Native Resolution | 1920 x 1080 |
| Connectivity | HDMI, DVI-D, VGA, DisplayPort |
| Speakers | Yes |
Key warnings and precautions for safe operation and avoiding hazards.
Explanation of safety symbols used in the manual.
Instructions for safe connection and usage of the display.
Comprehensive list of safety guidelines to follow.
Key warnings and cautions regarding appliance usage and hazards.
Statement of conformity with European standards and directives.
FCC compliance information for US users.
Details on protection circuits, power supply, and safety standards.
Information regarding the product's electromagnetic field emissions and safety.
Table listing hazardous substances in product components.
Information on the product's environmental protection use period and disposal guidance.
Placement and ventilation instructions in Nordic languages.
Guidance on proper disposal of the product under WEEE directive.
Information regarding ENERGY STAR compliance for energy efficiency.
Instructions for unpacking the product and checking contents.
Important notes for installation, including wall mounting.
Specifies the necessary space around the display for proper ventilation.
Identifies and describes the buttons on the display's control panel.
Details all available input and output ports on the display.
General functions, battery installation, handling, and operating range for the remote control.
Illustrates how to connect various external devices to the display.
Instructions for connecting multiple displays and IR pass-through.
Steps to set up a wired network connection for the display.
How to select and view content from connected devices.
Guide to customizing picture and sound settings for optimal viewing.
How to play media from network, USB, or display, and control playback.
Using the assistant to quickly adjust picture and sound settings.
Detailed settings for picture quality, including style and color.
Settings for audio output, surround modes, and general system configurations.
Configuring network resources, IP addresses, and network name.
Lists supported PC resolutions and refresh rates.
Lists supported SDTV and HDTV resolutions and refresh rates.
Defines pixels and sub-pixels in relation to image display.
Categorizes pixel defects and defines a defective 'dot'.
Describes dot defects, proximity, tolerances, and MURA.
Instructions for cleaning the display panel and cabinet, including safety precautions.
Lists common symptoms, possible causes, and remedies for display problems.
Detailed technical data for the display's screen and performance.
Specifications for all input and output terminals.
Specifications for power, dimensions, weight, and environmental conditions.
To Next Page