BDL5520QL
9
3.4. Wire-connecting to Network
(optional)
If you connect this display to a home network, you can play photos, music and videos from your computer. See Play multimedia les (Page 10) for more
detail.
PC
[RJ-45]
[RJ-45]
ROUTER
INTERNET
To setup the network:
1. Switch on the router and switch on its DHCP setting.
2. Connect the router to this display with an Ethernet cable.
3.
Press button on the remote control, then select {Setup}.
4. Select {Connect to network}, then press button.
5. Follow the on-screen instructions to install the network.
6. Wait for this display to nd the network connection.
7. If you are prompted, agree to the “End User Licence Agreement”.
NOTE: Connecting with a shielded CAT-5 Ethernet cable to comply with the EMC directive.
To Next Page
Loading...
