Philips BDP3000 Service Manual

Front panel
display
Description
LOADING Loading a disc.
UNSUPP The disc is not supported.
BD Blu-ray disc is recognized.
HDMI ERR The HDMI video resolution is
not supported by TV.
FASTFWD Fast forward mode.
FASTBWD Fast reverse mode.
SLOWFWD Slow forward mode.
SETTINGS Setup menu is displayed.
HOME Home menu is displayed.
CHAPTER Current chapter is in chapter
repeat mode.
RESUME Resume play is possible.
DOLBY D Dolby Digital audio is being
played.
DOLBY HD Dolby HD audio is being
played.
UPGRADE Software upgrade is in
progress.
Product overview
Main unit
a
Turn on the disc player or switch to •
standby mode.
When EasyLink is enabled, switch the •
disc player and all EasyLink devices to
standby. Note that you must press and
hold
for at least 3 seconds for this to
occur.
b Disc compartment
c
Open or close the disc compartment. •
d IR sensor
Point the remote control at the IR sensor.•
e Display panel
f
Start or resume play.•
g
Pause play.•
Move the paused picture one step •
forward.
2-3

Philips BDP3000 Specifications

Power

power supply	230-240 V, 50 Hz
power consumption	25 W
standby power consumption	0.5 W

Sound

signal to noise ratio	105 dB
dynamic range	100 dB
frequency response	(20 kHz) ±0.5 dB

Weight and Dimensions

packaging dimensions	525 x 125 x 285 mm
weight including packaging	3.77 kg
product dimensions	435 x 58 x 227 mm
product weight	3.00 kg