23
BASIC PLAYBACK
EN
EN
1
Insert a disc (refer to page 20 on
how to insert a disc).
• Home menu appears automatically.
2
With “Disc Tray” selected, press
[OK].
• Media filter screen will appear.
• For audio CD, skip to step 4.
3
Select the type of the file you want
to play back in the media filter
screen. Then press [OK] to display
the file list.
Blu-ray Disc Player
Disc Tray
SD Card
Settings
Product Info
4
Select a group (folder) or track / file
you want to play back. Then press
[B (play)] or [OK] to start playback.
Refer to “How to Navigate through the Track /
File List” on page 22.
To skip to the next track / file:
Press [T (next)].
To skip to the previous track / file:
Press [S (previous)].
To pause playback:
Press [F (pause)].
To return to the normal playback:
Press [B (play)].
To stop playback:
Press [C (stop)].
Playback will be in Resume-On-Stop mode.
<Resume-On-Stop mode for audio CD>
Playback will start from the point where it is
stopped next time you press [B (play)].
If you press [OK] instead of [B (play)],
playback will start from the beginning of the
track instead of resuming from the stop point.
<Resume-On-Stop mode for JPEG>
Playback will start from the beginning of the
current file next time you press [B (play)] or
[OK].
To go back to the media filter screen:
Press [RED] in Resume-On-Stop mode.
Note
• Playback will also stop and the home menu will
appear when you press [(home)].
• With regard to the multi-border BD-RE/-R,
additionally recorded sections cannot be
recognized.
• With regard to the multi-border DVD-RW/-R,
additionally recorded sections may not be
recognized.
Introduction Connections Basic Setup Playback OthersFunction Setup
To Next Page
Loading...
