Philips BDP5650 - Sound; Network (Installation, Smart TV; Preference (Languages, Parental Control

10 EN
Note
• If you change a setting, make sure that the TV supports
the new setting.
Sound
1 Press .
2 Select [Setup] > [Audio] to access the
audio setup options.
• [Night mode]: Select quiet or full dynamic
sound. Night mode decreases the volume
of loud sound and increases the volume of
soft sound (such as speech).
• [HDMI audio]: Set an HDMI audio format
when this player is connected through
HDMI.
• [Digital audio]: Select an audio format
for the sound output when this player is
connected through a digital connector
(OPTICAL).
• [PCM downsampling]: Set the sampling
rate for PCM audio output when this
player is connected through a digital
connector (OPTICAL).
Note
• For settings related to HDMI, the TV must be
connected through HDMI.
• Night mode is only available for Dolby TrueHD, Dolby
Digital Plus encoded DVD and Blu-ray discs.
Network (installation, Smart
TV...)
1 Press .
2 Select [Setup] > [Network] to access the
network setup options.
• [Network installation]: Start a wired or
wireless installation to make the network
work.
• [View network settings]: Display the
current network status.
• [View wireless settings]: Display the
current Wi-Fi status.
• [Clear Smart TV memory]: Clear the
history of Smart TV browser (such as
cookies).
• [Name your Product:]: Re-name this
playerforidenticationinahomenetwork.
• [Miracast break-in]: Turn on or off
Miracast.
• [Miracast browser]: Scan for Miracast
devices.
• [Miracast role]: Force this player to be
Group Owner or automatically choose a
device to be Group Owner.
• [Auto]: The role of Group owner is
automatically determined between the
source device and this player when
connection is established.
• [Group Owner]: Force this player to
be Group Owner and allow it to select
the channel to use for establishing the
link with the source device.
Preference (languages,
parental control...)
1 Press .
2 Select [Setup] > [Preference] to access
the preference setup options.
• [Menu language]: Select an onscreen
display menu language.