Philips BiPAP A40 - 5.6.1 Changing Device Settings and Alarms

Chapter 5 Viewing and Changing Settings
43
5.6.1 Changing Device Settings and Alarms
1. From the Main Menu screen, use the Up/Down key to highlight the Settings and Alarms item.
2. Press the Right key to select Settings and Alarms.
The device settings are listed below, along with the therapy modes in which they are available. The
following settings are common to all therapy modes:
• Therapy Mode • System One Resistance Lock
• Ramp Length • System One Resistance
• System One Humidication • Circuit Disconnect
• Humidier • Apnea
• Tubing Type Lock • Low Minute Ventilation
• Tubing Type • High Respiratory Rate