Philips BiPAP A40 - Page 51

BiPAP A40 user manual
44
The settings below are specic to the modes listed in the table.
Therapy Modes
Therapy Setting CPAP S S/T T PC AVAPS-AE
Trigger Type X X X X X
Auto-Trak X X X X X
Auto-Trak [Sensitive] X X X X X
Flow Trigger X X X X X
Flow Trigger Sensitivity X X X X X
Flow Cycle Sensitivity X X X X
CPAP X
Flex Lock X
3
Flex X
3
AVAPS X
2
X X X
AVAPS Rate X
1
X
1
X
1
X
1
X
Tidal Volume X
1
X
1
X
1
X
1
X
IPAP Max Pressure X
1
X
1
X
1
X
1
IPAP Min Pressure X
1
X
1
X
1
X
1
IPAP X X X X
EPAP X X X X
Breath Rate X X X X
Inspiratory Time X X X X
4
Maximum Pressure X
Pressure Support Max X
Pressure Support Min X
EPAP Max Pressure X
EPAP Min Pressure X
Rise Time Lock X X X X X
Rise Time X
2
X X X X
Ramp Start Pressure X X X X X
Low Tidal Volume Alarm X
1
X
1
X
1
X
1
X
1. Only available when AVAPS is enabled.
2. AVAPS and Rise Time are not available when Flex is enabled.
3. Flex is not available when AVAPS is enabled.
4. Inspiratory time is only available in AVAPS-AE when the breath rate is set between 1 and 40 BPM.