Philips BiPAP A40 - 5.7 Updating Prescriptions Using the SD Card; 5.8 Changing Settings in Limited Menu Access Mode

Chapter 5 Viewing and Changing Settings
55
5.7 Updating Prescriptions Using the SD Card
You can update the patient’s prescription using the SD Card. The prescription update can occur
either when the ventilator is o or on.
1. Insert an SD Card with a valid prescription into the device. A “Change Prescription?” message
appears on the display.
2. Select Yes to start the prescription update process. Select No to cancel the prescription update
process and return to the previous display.
3. Select Page to review the entire prescription. Select Cancel to cancel the prescription update
process and return the screen to the initial state before the prescription update started.
4. Once the entire prescription has been reviewed, a screen displays with the option to Cancel or
OK the changes. Select OK to complete the prescription update and display the Prescription
Change conrmation screen. Select Cancel to cancel the prescription update process and
return the screen to the initial state before the prescription update started.
If the SD card is removed at any time during the prescription update, the process aborts and
the screen returns to the initial state before the prescription update started.
A message appears on the display if errors occur during this process. For details on the possible
prescription errors, refer to Chapter 8, Troubleshooting.
5.8 Changing Settings in Limited Menu Access Mode
The settings available to users are limited when the device is set to Limited access mode.
1. Press the Up key to enter the Menu screens from the Standby or Monitor screens. The Main
Menu screen appears.
2. Choose from the following selections on the Main Menu screen:
- Safely Remove SD Card: This option appears if an SD card is inserted in the ventilator.
Select this option when you want to remove the SD card. When the “Remove SD Card”
conrmation message appears, remove the card. If you press the Left (Cancel) button or
don’t remove the card within 30 seconds, the conrmation message will close and the
ventilator will continue writing to the card.