BiPAP A40 user manual
56
- My Settings: View and change certain prescription settings, such as rise time or ramp
starting pressure, if these settings were enabled by your provider.
- Options: View and change certain device settings, such as keypad lock or keypad
backlighting.
- Alarm Log: View a list of the 20 most recent alarms that have occurred.
- Information: View detailed information about your device, such as the device’s software
version and serial number.
5.8.1 Changing My Settings Menu Items
1. From the Main Menu screen, use the Up/Down key to highlight the My Settings item.
2. Press the Right key to select My Settings. The My Settings screen will appear.
Follow the general instructions below to navigate and change any of the therapy settings.
1. From the My Settings screen, use the Up/Down button to navigate to the setting you want to
change and highlight it.
2 To modify a setting once it is highlighted, press the Right (Modify) button.
3. Use the Up/Down (Edit) button to scroll through the available settings. Press Down to decrease
the setting, or press Up to increase the setting.
4. Once you have chosen the setting you want, press the Right (OK) button to save the new
setting. Or, if you decide not to change the setting, press the Left (Cancel) button.
5. You can now either navigate to the next setting you want to change using the Up/Down
(Navigate) button, or exit the My Settings menu by pressing the Left (Finish) button to return to
the Main Menu.
You can change the following settings in the My Settings menu, if they are enabled by your home
care service provider. Refer to the Therapy Settings section earlier in this chapter for details about
each setting.
• Tubing Type
• Rise Time
• Ramp Start Pressure
• Flex
• System One Resistance
• Humidier
To Next Page
Loading...