Philips BTM2360 - 7 Other Features; Timers and External Audio

13EN
5 Listen to the
radio
Tune to a radio station
Tip
•
Position the antenna as far as possible from TV, VCR, or
other radiation source.
• For optimal reception, fully extend and adjust the
position of the antenna.
1 Press FM/AUDIO IN repeatedly to select
FM source.
2 Press and hold / for more than two
seconds.
» The radio tunes to a station with
strong reception automatically.
3 Repeat step 2 to tune to more stations.
To tune to a weak station:
Press
/ repeatedlyuntilyoundoptimal
reception.
Program radio stations
automatically
Note
•
You can program a maximum of 20 preset radio
stations (FM).
In tuner mode, press and hold PROG for
more than two seconds to activate automatic
programming.
» All available stations are programmed in the
order of waveband reception strength.
» Therstprogrammedradiostationis
broadcast automatically.
Program radio stations
manually
1
Tune to a radio station.
2 Press PROG to activate program mode.
» [PROG] (program) displays on the
screen.
3 Press / to allocate a number from
1–20 to this radio station, and then press
PROGtoconrm.
» Thepresetnumberandthefrequency
of the preset station are displayed.
4 Repeat steps 1-3 to program more
stations.
Note
•
To overwrite a programmed station, store another
station in its place.
Select a preset radio station
In tuner mode, press / to select a preset
number.