Philips CD 720 - Programming; Storing a Programme; Playing the Programme; Erasing a Programme

PROGRAMMING
STORING A PROGRAMME (PROGRAM and ►► !) _
You can store 30 tracks from each CD in any required sequence in a programme.
FULL lights up if you exceed the maximum of 30 tracks.
• In STOP mode, press PROGRAM 10 to open the memory.
- PROGR lights up and E3S21 starts flashing.
• Press or 4 (less than 0.5 seconds) until! the first desired track number
appears under TRACK.
T*** TMAJX rmrn
I 2 IS'5
• Press PROGRAM 10 again.
- The track number has now been stored in the player's memory.
• Select the other track numbers required and store each track by pressing PROGRAM.
- The number of tracks and the playing time of your programme will be shown under
TRACK and TOTAL TIME.
5 1&4S^
‘
- The track number indicator always shows which numbers have been stored.
PLAYING THE PROGRAMME (PLAY/REPLAY)
• Press PLAY/REPLAY 6.
- Playback starts with the first number of the pro¬
gramme.
All keys (except PROGRAM 10 and PEAK SEARCH
5) can be used during programmed play.
Search for a particular passage is only possible
within the track being played.
ERASING A PROGRAMME
{STOP/CP or OPEN/CLOSE)
During play:
• Press OPEN/CLOSE 7 or STOP/CP 5 (twice).
In STOP mode:
• Press OPEN/CLOSE 7oror STOP/CP 5 (once).
- The programme has now been erased.
11
English