Philips CD 720 - Table of Contents; Power Supply Setting; Connections; Connecting Headphones (CD720 Only)

CONTENTS
INSTALLATION
PAGE
INSTALLATION.5
Power supply setting...........................5
Connections........ . ... . ... . .. .5
Connecting headphones (CD720 only)........... 5
FUNCTIONAL OVERVIEW.6-7
Front of player.... 6
Remote control (CD720 only)..... . 6
Display.. 7
Display messages... . 7
PLAYBACK.8-10
Normal playback.. .. . .. 8
Selecting another track......................9
Searching fora passage..............9
Starting with a particular track .........................9
Playing the CD in random order....... 9
Repeating play................9
Calling up other time information ..9
Searching the loudest passage......10
Setting the fade-in and fade-out time ............10
Scanning a CD (CD720 only) ...10
Adjusting the sound level (CD720 only)........ 10
PROGRAMMING.11
Storing a programme.... . .. ... .. . 1 1
Playing the programme.....11
Erasing a programme........11
ADDITIONAL INFORMATION.12
Maintenance. 1 2
Recycling.. .. . ... . .. . ... . . . .. 1 2
Technical data............. . . . . 1 2
Troubleshooting.13
POWER SUPPLY SETTING _
• Check that the type plate at the bottom of your
player indicates the correct supply voltage.
• This player is equipped with a
voltage selector at the bottom
which enables you to set the
player to the correct mains voltage.
Position 120 V: for all mains volt¬
ages between 110V and 127 V.
Position 230 V: for all mains voltages between
220V and 240 V.
CONNECTIONS
1 2
1 Mains connection
• Connect the mains lead to your mains supply.
2 Connecting cable to the amplifier
• insert the red plug (right channel) and the white
plug (left channel) into the corresponding sock¬
ets of the CD or AUX input of your amplifier.
You can also use the TUNER or TAPE IN-
connection, but never the PHONO input!
CONNECTING HEADPHONES (CD720 only)
• Connect headphones
with a 6.3 mm jack
plug to the PHONES
socket 11 .
• The sound level is
adjusted with the
LEVEL control 13.
5
English