Philips CD 720 - Playback; Normal Playback

English
PLAYBACK
NORMAL PLAYBACK (PLAY/REPLAY)
NOTE! Use only audio CDs; no CD-ROM[ CD-1 or CDV.
• Press POWER ON/STANDBY 7 to switch the player on.
• Open the CD compartment by pressing OPEN/CLOSE 7.
- OPEN lights up.
• Insert an audio CD, printed side up, and close the compartment by pressing
OPEN/CLOSE 7.
- CLOSE lights up, followed
are shown on the display.
IE5S U IU
by READ. The number of tracks and the playing time of the CD
Press PLAY/REPLAY 6 t o start play.
You can also press PLAY/REPLAY immediately after inserting the CD; the compartment
then closes automatically.
You can also close the CD compartment by pressing its front; playback will then start
automatically.
The number indicator shows how many tracks are on the CD; when a track has been
played its number disappears.
■ i * * - 5 6 7 a * - ,o " nr
•3 -4 -5 >6 *7 -8 *9 -10 >11 -12
- The track being played is always shown under TRACK and its elapsed playing time is
shown under TRACK TIME.
D
Z3 U C
U: i O
- Play will stop after the last track.
• Press POWER ON/STANDBY 7 to switch the player off.
You can interrupt playback by pressing PAUSE 75; PAUSE then lights up.
Press PLAY/REPLAY 5 to restart; if you first press PAUSE again and then PLAY/REPLAY,
the current track starts again from the beginning.
You can also restart play by pressing SCAN 16 (on the remote control - CD720 only) or
SHUFFLE 74.
If you press PLAY/REPLAY during play, the current track starts again from the beginning.
You can stop playback by pressing STOP/CP 5 or OPEN/CLOSE 7.
8