Technical Specifications CDR600
GB 2 CDR6001.
1.Technical Specifications CDR600
1.1 General
Mains voltage :all range version 84-
250V (/00),
:USA version 117V/
60Hz (/17)
Mains frequency :50-60 Hz
Power consumption :15W
1.2 Input/Output
1.2.1 Line output
Output level :2Vrms at 0dB
Output resistance :200
Ω
1.2.2 Line input
Input sensitivity :500mVrms
Input impedance :50k
Ω
Max. input voltage :2.5Vrms
1.2.3 Digital output
Format :AES/EBU format
according IEC958
(consumer format)
Sampling frequency :44.1kHz
Output resistance :75
Ω
1.2.4 Digital input
Format :AES/EBU format
according IEC958
(consumer format)
Sampling frequency :32 to 96kHz
Input resistance :75
Ω
1.2.5 Optical input
Format :AES/EBU format
according IEC958
(consumer format)
Sampling frequency :32 to 48kHz
1.3 Audio Performance
1.3.1 Cinch analog output (play-back path)
Output voltage :2Vrms
±
2dB (0dB
signal)
Frequency range F.R. :20Hz < F.R.< 20kHz
Amplitude linearity :
±
0.3dB (typical
±
0.1dB)
Channel unbalance :< 0.3dB at 1kHz
(typical
±
0.2dB)
Output resistance :200
Ω
Phase non-linearity :< 0.2 deg at 1kHz
Outband attenuation :50dB above 30kHz
Channel separation :> 90dB at 1kHz
(typical 110dB)
:> 85dB between 20Hz
and 20kHz (typical >
93dB)
S/N-ratio A-weighted :> 98dB (typical
102dB)
S/N-ratio unweighted :> 93dB (typical 95dB)
Dynamic range :> 92dB at 1kHz
(typical 96dB)
: > 90dB between
20Hz and 20kHz
(typical 96dB)
THD+N :> 82dB between 20Hz
and 20kHz (typical
88dB)
1.3.2 Cinch analog input/output (monitor path)
Measured with Audio precision system one.
Input voltage is 500Vrms.
Output voltage :2Vrms
±
2dB (0dB
signal)
Frequency range F.R. :20Hz < F.R.< 20kHz
Amplitude linearity :
±
0.3dB (typical
±
0.1dB)
Channel unbalance :< 0.3dB at 1kHz
(typical
±
0.2dB)
Output resistance :200
Ω
Phase non-linearity :< 0.2 deg at 1kHz
Outband attenuation :50dB above 30kHz
Channel separation :> 90dB at 1kHz
(typical 98dB)
:> 85dB between 20Hz
and 20kHz (typical >
92dB)
S/N-ratio unweighted :> 84dB (typical 88dB)
Dynamic range :> 82dB at 1kHz
(typical 90dB)
THD+N :> 80dB between 20Hz
and 20kHz (typical
85dB)
Intermodulation THD :> 80dB
1.3.3 Headphone output (all functions)
Output voltage :3Vrms (0dB)/8-2000
Ω
S/N :> 80dB
THD+N :> 75dB
Channel separation :> 60dB between 20Hz
and 20kHz
1.4 Laser Device
Material :GaAlAs
Wave length :between 780 and
800nm (at 25(C)
Laser output :1mW max. during
reading, 20mW max.
during writing
Class :3B
1.5 Dimensions and Weight
Number and height of feet : 4x11mm foiled
Apparatus tray closed (WxDxH) : 435x305x75mm (without
feet)
Weight without packaging : 3.2kg
Weight with packaging : 4.2kg