Philips CDR880 - Advanced Recording and Playback Features; CD Sync Recording Functionality; SCMS System Explanation; Disc Finalization Process Guide

again insert track numbers any place you
like during recording.
When the recording stops, the discs’s
temporary Table Of Contents is auto-
matically updated, and when you come
back to resume recording, the player
automatically finds the end of the last
recording session.
CD Sync Recording
With this ultimate convenience
feature, recording starts automatically as
soon as the source begins to play.
CD-Sync Recording lets you record either
individual tracks or an entire disc from
any digital input, with automatic or
manual track numbering.
1 2 3 4
Front
1 POWER ON/OFF
2 Headphone jack (PHONES)
3 Headphone level (LEVEL)
4 Disc tray
5 Display
6 OPEN/CLOSE
7 Record CREC)
8 FINALIZE
9 ERASE
10 CDSYNC
11 Previous track selection (PREV)
12 Next track selection (NEXT)
13. PLAY
14 PAUSE
is STOP
SCMS
The CDR 870 incorporates the
internationally-accepted SCMS Serial Copy
Management System. With SCMS, only
single direct copies of digital source
material are permitted: it is not possible
to copy digital copies.
Finalizing A Disc
Finalizing a fully-recorded disc is a
simple matter of pressing the Finalize
key, followed by Record. Once initiated,
the procedure is fully automatic.
After finalization, discs will play on
other CD players or recorders, but further
music tracks cannot be added.
CD-RW discs can be rewritten after they
have been completely erased.
16 Level Meter (analogue input)
17 AUTO/MANUAL track increment
selection
18 DISPLAY indication selection
19 INPUT select
Rear
1 Analogue line input jacks
2 Analogue line output jacks
3 Digital input
4 Digital output
5 Optical digital input
6 Optical digital output
7 Voltage selector (not on all versions)
8 AC Mains input
Playback
The CDR 870 has all the familiar CD
playback features: play, pause, next and
previous track, track selection by
number, 2-speed fast forward and reverse
search, and programmed playback.
1 9
2 10
- 1
4 12
5 13
6 14
15
7 16
8 17
18
Remote
1 OPEN/CLOSE
2 INPUT selector
3 Numeric buttons 0-9
4 STOP
5 PREVIOUS
6 Search reverse button
7 TRACK INCRement
8 FINALIZE
9 CDSYNC
10 REC
11 PROGRAM
12 FAST search button
13. Search forward button
14 NEXT
15 PLAY
16 PAUSE
17 REPEAT
18 DISPLAY indication modes