Philips CEM200 - Replace Fuse; Remove the Unit

20
Remove the unit
You can remove the unit from the dashboard.
1 Detach the front panel.
2 Pull out the unit by using the removal
keys.
Replace fuse
If the fuse is damaged,
1 Check the electric connection.
2 Buy a fuse that matches the voltage of the
damaged fuse.
3 Replace the fuse.
Note
If the new fuse gets damaged again, there may 
be an internal malfunction. Consult your Philips
dealer.
FUSE 15A
FUSE 15A
EN