18
Tip
When a traffic announcement cuts in, user •
can short press to terminate the traffic
announcement, and the unit will resume to
previous playback mode.
Set RDS clock
You can use time signal that is broadcast
together with the RDS signal to set the clock of
the unit automatically.
1 Press MENU.
2 Press or repeatedly until [CT] is
displayed.
3 Rotate to select a setting:
• [CT ON]: Turn on the RDS clock.
Time shown on the unit synchronizes
with that on the RDS station.
• [CT OFF]: Turn off the RDS clock.
Tip
The accuracy of the transmitted time depends •
on the RDS station that transmits the time
signal.
• [AF OFF]: Turn off the AF mode.
Set region for AF tuning
You can define AF tuning region:
[REG
ON]
Only stations in current region
can be tuned to automatically.
[REG
OFF]
All stations can be tuned to
automatically.
1 Press MENU.
2 Press or repeatedly until [REG]
(Regional Radio) is displayed.
3 Rotate to select a setting.
Receive traffic announcement
If you do not want to miss traffic
announcement when enjoying music, turn on
the TA (Traffic Announcement) function.
1 Press MENU or OPTIONS.
2 Press or repeatedly until [TA] is
displayed.
3 Rotate to select a setting:
• [TA ON]: When there is traffic
announcement, the unit switches
to the tuner mode (regardless of
the current mode) and begins to
broadcast the traffic conditions.
When the traffic announcement
is over, it returns to the previous
mode.
• [TA OFF]: Traffic announcement
does not cut in.
Note
If the current received TA signal remains weak •
for over 120 seconds, the unit will activate TA
Seek mode automatically. The TA Seek will
seek for other station with good condition of
TA signal.
EN
To Next Page
Loading...
