22
Select blackout setting
You can set the screen to turn off automatically
after the unit is idle for 10 or 20 seconds.
1 Press MENU.
2 Rotate to select a setting:
• [BKO 10 S] : Turn off the screen
automatically 10 seconds after last
operation.
• [BKO 20 S] : Turn off the screen
automatically 20 seconds after last
operation.
• [BKO OFF] : Never turn off the
screen.
3 Press to confirm.
Turn demo mode on/off
1 Press MENU.
2 Press or repeatedly until [DEMO] is
displayed.
The screen shows current Demo »
mode setting.
3 Rotate to select a setting:
• [DEMO ON] : Turn on the demo
mode. When the unit is idle for
more than 10 seconds, all functions
are displayed.
• [DEMO OFF] : Turn off the demo
mode.
8 Adjust system
settings
Select anti-shock setting
You can select anti-shock setting according to
the stability of your car and the condition of the
road.
1 Press MENU.
2 Press or repeatedly until [ESP] is
displayed.
3 Turn to select a setting:
• [ESP 10S]: when the road is smooth
and there are few bumps.
• [ESP 40S]: when the road is bumpy
and unstable.
4 Press to confirm.
Turn beep sound on/off
Each time you press a button, the unit beeps.
You can turn on or off this beep sound.
1 Press MENU.
2 Press or repeatedly to until [BEEP]
is displayed.
3 Rotate to select a setting:
• [BEEP ON]: Turn on the beep
sound.
• [BEEP OFF]: Turn off the beep
sound.
EN
To Next Page
Loading...
