Philips CEM220 - 9 Product Information

EN 21
English
9 Product
information
Note
Product information is subject to change without prior notice.•
Power supply 12 V DC (11 V - 16 V),
negative ground
Fuse 15 A
Suitable speaker
impedance
4 - 8
Maximum power output 50 W x 4 channels
Continuous power
output
24 W x 4 channels
(4
10% T.H.D.)
Pre-Amp output
voltage
2.0 V ( USB play mode;
1 kHz, 0 dB, 10 k
load)
Subwoofer output
voltage
2.0 V (USB play mode:
61 Hz, 0 dB, 10 k
load)
Aux-in level
300 mV
Dimensions (W x H x D) 188 x 58 x 190mm
Weight 1.36 kg
Radio
Frequency range
- FM
87.5 - 108.0 MHz (Europe)
87.5 - 107.9 MHz
(American)
Frequency range -
AM(MW)
522 - 1620 KHz (Europe)
530 - 1710 KHz
(American)
Usable sensitivity
- FM 8 V
Usable sensitivity -
AM(MW) (S/N =
20 dB) 30 V
Compatible USB devices:
USB fl ash memory (USB 2.0 or USB1.1)•
USB fl ash players (USB 2.0 or USB1.1)•
memory cards (SD / MMC / SDHC)•
Supported formats:
USB or memory fi le format: FAT16, FAT32•
MP3 bit rate (data rate): 32-320 Kbps and •
variable bit rate
WMA v9 or earlier•
Directory nesting up to a maximum of 8 •
levels
Number of albums/ folders: maximum 99•
Number of tracks/titles: maximum 999•
ID3 tag v2.0 or later•
File name in Unicode UTF8 (maximum •
length: 128 bytes)
Unsupported formats:
Empty albums: an empty album is an album •
that does not contain MP3/WMA fi les, and
is not be shown in the display.
Unsupported fi le formats are skipped. For •
example, Word documents (.doc) or MP3
fi les with extension .dlf are ignored and
not played.
AAC, WAV, PCM audio fi les•
DRM protected WMA fi les (.wav, .m4a,
•
.m4p, .mp4, .aac)
WMA fi les in Lossless format•
ISO9660, Joliet•
Maximum title number: 512 (depending on •
fi le name length)
Maximum album number: 255•
Supported sampling frequencies: 32 kHz, •
44.1kHz, 48 kHz
Supported Bit-rates: 32~256 (kbps), •
variable bit rates