9EN
Choose your sound
This section helps you choose the ideal sound
for your music.
Change treble or bass
Change the high frequency (treble) or low
frequency (bass) settings of the SoundBar to
suit your music.
Press TREBLE +/- or BASS +/- to increase or
decrease treble or bass.
• The Source indicators on the front panel
blink once when the treble or bass is set to
either minimum or maximum.
Surround sound mode
Experience an immersive audio experience with
surround sound modes.
Press SURROUND repeatedly to switch
surround mode on or off.
» When surround mode is on, the SURR on
the front panel lights up.
Night mode
For quiet listening, night mode decreases the
volume of loud sounds when audio is played.
Night mode is only available for Dolby Digital
soundtracks.
1 Press and hold SURROUND for three
seconds to turn night mode on or off.
» When night mode is turned on, the
AUX indicator on the front panel
blinks twice.
» When night mode is turned off, the
MUSIC iLINK indicator on the front
panel blinks twice.
MP3 player
Connect your MP3 player to play your audio
les or music.
What you need
• An MP3 player.
• A 3.5mm stereo audio cable.
1 Using the 3.5mm stereo audio cable,
connect the MP3 player to the AUDIO IN
connector on your SoundBar.
2 Press MUSIC iLINK (AUDIO IN) on the
remote control.
» AUDIO IN indicator on the front
panel lights up.
3 Press the buttons on the MP3 player to
select and play audio les or music.
Play audio through Bluetooth
Through Bluetooth, connect the SoundBar with
your Bluetooth device (such as an iPad, iPhone,
iPod touch, Android phone, or laptop), and then
you can listen to the audio les stored on the
device through your SoundBar speakers.
What you need
• A Bluetooth device which supports
Bluetooth prole A2DP, and with Bluetooth
version as 3.0 + EDR.
• The operational range between the
SoundBar and a Bluetooth device is
approximately 10 meters (30 feet).
To Next Page
Loading...
Need help?
General
Weight and Dimensions
