16
EN
a Unzip the download if zipped, and
makesurethattheunzippedle
containsthefollowingtwoles.
"CSS5235.bin" (for the software of
the main unit)
"MCU5235.bin" (for the software
of the surround speakers)
b Put the "CSS5235.bin" and
"MCU5235.bin" in the root
directory of the USB device.
3 Connect the USB storage device to
the connector on this product.
4 Switch this product to the HDMI ARC
source, and switch your TV to the
HDMI source.
5 On the remote control, within 6
seconds press twice, and Volume +
once, then hold down MOVIE until
upgrade information appears on the
TV screen.
» If an upgrade media is detected, on
the TV screen you are prompted
to start the update.
» If an upgrade media is not
detected, an error message is
displayed on the TV screen. Make
sure that the latest software of this
product is put in the USB storage
device.
6 Press to start the update.
7 Wait until the update is completed.
» If the update is complete, this
product automatically turns off and
on again.
Caution
• Do not turn off the power or remove
the USB storage device when the
software update is in progress because
you might damage this player.
CSS5235Y_93_UM_V1.0.indb 16 4/24/2015 3:50:58 PM
To Next Page
Loading...
Need help?
General