Philips D141 - Network Type; Select the Recall Duration; Dial Mode; Auto Clock

30
EN
Network type
Note
• This is a country dependent feature. It
only applies to models with network type
support.
1
Press MENU/OK.
2
Select [SERVICES] > [NETWORK
TYPE], then press MENU/OK.
3
Select a network type, then press
MENU/OK.
» The setting is saved.
Tip
• Select [PSTN] if the phone is connected
to a xed line (e.g. at home).
• Select [PBX] if the phone is connected to
a private telephone line (e.g. in the oce).
Select the recall
duration
Make sure that the recall time is set
correctly before you can answer
a second call. In normal case, the
phone is already preset for the recall
duration. You can select among 3
options: [SHORT], [MEDIUM] and
[LONG]. The number of available
options varies with dierent countries.
For details, consult your service
provider.
1
Press MENU/OK.
2
Select [SERVICES] > [RECALL
TIME], then press MENU/OK to
conrm.
3
Select an option, then press
MENU/OK to conrm.
» The setting is saved.
Dial mode
Note
• This feature is country dependent and only
applies to models that support both tone
and pulse dial.
Dial mode is the telephone signal
used in your country. The phone
supports tone (DTMF) and pulse
(rotary) dial. Consult the service
provider for detailed information.
Set the dial mode
1
Press MENU/OK.
2
Select [SERVICES] > [DIAL MODE],
then press MENU/OK to conrm.
3
Select a dial mode, then press
MENU/OK to conrm.
» The setting is saved.
Note
• If your phone is in pulse dial mode, press
during a call for temporary tone mode. Digits
entered for this call are then sent out as tone
signals.
Auto clock
Note
• This service is network dependent.
• Make sure you have subscribed to the caller
ID service before you use this feature.
It synchronizes the date and time
on your phone with the public
switched telephone network (PSTN)
automatically. For the date to be