Philips D6350 - Sound Settings

22 EN
12 Sound settings
Set the handset's ringtone
volume
You can select among 5 ringtone volume levels
or progressive (that is, the ringtone starts soft
and gets louder over time if the call is not
answered).
1 Select [Menu].
2 Press / to select , then press
[Select].
3 Select [Ring volume], then press [OK] to
conrm.
4 Select a volume level, then press [OK] to
conrm.
» The setting is saved.
Tip
• When you turn the ringtone off, is displayed on the
screen.
Set the handset's ringtone for
internal calls
You can select from 11 ringtones for internal
calls.
1 Select [Menu].
2 Press / to select , then press
[Select].
3 Select [Ringtone int.], then press [OK] to
conrm.
4 Select a ringtone, then press [OK] to
conrm.
» The setting is saved.
Set the handset's ringtone for
external calls
You can select from 11 ringtones for external
calls.
1 Select [Menu].
2 Press / to select , then press
[Select].
3 Select [Ringtone ext.], then press [OK] to
conrm.
4 Select a ringtone, then press [OK] to
conrm.
» The setting is saved.
Set the key tone
Key tone is the sound made when you press a
key on the handset.
1 Select [Menu].
2 Press / to select , then press
[Select].
3 Select [Key tone], then press [OK] to
conrm.
4 Select [On]/[Off], then press [OK] to
conrm.
» The setting is saved.
Set the docking tone
Docking tone is the sound made when you
place the handset on the base station or
charger.
1 Select [Menu].
2 Press / to select , then press
[Select].
3 Select [Docking tone], then press [OK] to
conrm.
4 Select [On]/[Off], then press [OK] to
conrm.